- Regularly check that all chassis locking devices are in full working order.
- Use a silicone based spray such as furniture polish to lubricate moving parts. Petroleum jelly can be used to lubricate the axle stubs. Periodically remove the wheels to clean and lubricate.
- Check all fastenings regularly to ensure they are locked tight and secure. Replace any parts in an inferior condition. When using this product by the sea, off-road or in winter it is important to clean your pushchair chassis using clean fresh water and ensure it dries thoroughly. Potential corrosion could occur if salt water and salt and grit from the roads is not removed.
- Please contact your local retailer should any part of the product become damaged.
- Keep exposure to sunlight to a minimum, excessive exposure to sunlight could cause discolouration to the fabrics.
- Always use the raincover in wet weather to protect fabrics.
- Keep your pushchair away from heat sources such as BBQ’s, fires and heaters.
- Do not place any items on top of the canopy, this could make the product unsafe and potentially damage the fabrics.
- Hanging heavy loads from the back or sides of the pushchair could potentially affect the stability.
- Tyres can leave marks on some surfaces.
- Fabrics should be cleaned in accordance with the care labels. Do not wash the fabrics in the washing machine.
- Only use a Mee-go buggy board with your Mee-go pushchair, using any other buggy board will invalidate your warranty.
- Should you find a defect with your pushchair please contact the original place of purchase. Ensure you have your original receipt with the date clearly shown.
- To read further information about warranty please visit the warranty page here.
- To register your product and activate your warranty visit the registration page here.
Mee-Go
Mee-go Milano Evo 2 in 1 Pram & Pushchair - Slate Grey
Mee-go Milano Evo 2 in 1 Pram & Pushchair - Slate Grey
Introducing the Milano Evo 2 in 1 pushchair—a stylish and adaptable companion for your baby from new-born to toddler. With a lightweight, easy-fold chassis, it’s perfect for both urban strolls and off-road adventures. The puncture-resistant, shock-absorbing wheels ensure a smooth ride on any terrain. Its adaptable carrycot and adjustable seat unit, allows this pushchair to grow with your baby, from new-born to toddler.
Choose from a range of stunning, stylish colour options to find the perfect Milano Evo 2 in 1 pushchair for you. Whether you prefer the pure simplicity of Pearl White, the sophisticated elegance of Slate Grey, the warm tones of Sahara, or the bold statement of Abstract Black, there’s a shade to match your personal style.
Included in Package
- Easy Fold Chassis
- Reclining Seat Unit
- Universal Car Seat Adapter
- Comfortable Carrycot & Mattress
- Stylish Rucksack
- Protective Rain cover
- Insect Net
- Handy Cup Holder
Features
The Milano Evo 2 in 1 Carrycot features a magnetic wind deflector and transparent window, allowing constant eye contact with your baby. The apron unzips for quick access, while the extendable hood reveals a ventilation panel, ensuring comfort. It’s also suitable for overnight sleeping, making it a versatile option for both day and night.
The fully adjustable seat unit includes an extendable footrest, five-point harness, and leather-trimmed bumper bar with a gate-opening function. The hood extends for extra coverage, offering additional airflow through a small ventilation window.
Its pushchair stands out with thoughtful little features that make a big impact. Its easy-fold chassis ensures quick and hassle-free setup and storage, while the stylish leather shopping basket offers ample space for all your essentials.
The puncture-resistant, shock-absorbing wheels provide smooth rides on any terrain and the included changing bag is an attractive and useful rucksack, which attaches to the handlebar, keeping everything within reach.
These practical details ensure both comfort and convenience, making the Milano Evo 2 in 1 a must-have for parents on the go.
Specification
Dimension
- Chassis Folded (incl. Wheels): 72 x 58 x 58cm
- Chassis Open (incl. Wheels): 121 x 58 x 107cm
- Seat Unit (outer dimensions): 90 x 32cm
- Carrycot (outer dimensions): 75 x 34 x 21cm
Weights
- Chassis (incl. Wheels): 8.5kg
- Seat Unit: 4.5kg
- Carrycot: 5.5kg
- Car Seat: 3.7kg
The Mee-go warranty policy
We guarantee the product has been manufactured to comply with all current safety requirements and has already undergone stringent quality checks applicable and the product is free from defects before being packaged and dispatched.
If however your product does show signs of a manufacturing defect within the warranty period (listed below), we will comply with our warranty terms and conditions, providing the product has been used in accordance with the Mee-Go policy and has been serviced and maintained correctly.
Please see the Mee-Go Care & Maintenance guidelines below. The warranty of your product becomes valid from the date of purchase stated on your original receipt of purchase. After purchasing your Mee-go product, please retain your original receipt, this does not affect your statutory rights.
Warranty Terms
Chassis & Seat Frames | 24 months |
Seat Fabrics, Carrycots Fabrics & Accessories | 6 months |
The warranty is not valid in the following circumstances:
- This product has not been used for its purpose other than the purpose described in the instruction and user manual.
- If the product has been submitted for repair with an unauthorised retailer or distributor not approved by Mee-go Limited.
- If the product has been purchased second hand or online through an unauthorised retailer.
- If additional unauthorised products have been used on the product.
What the warranty does not cover:
- Everyday wear and tear
- Accidental damage
- Negligence or improper usage
- Misuse and not following maintenance instructions
What to do in the case of a defect:
Keep your original receipt safe, the date of purchase must be clearly visible on the receipt. In the first instance you must contact us via email at returns@primebabygears.com. We will then tell you where to send the product so it can be inspected.
Where repairs are carried out, this does not extend the warranty. Always contact us in the first instance at Returns@primebabygear.com, do not return your product direct to the manufacturer.
Mee-go Care & Maintenance
Delivery & Returns
Lead Time
- Free shipping within 2-3 days.
- Orders placed before 12pm (Mon-Fri): same-day dispatch.
- Orders after 12pm (Mon-Thurs): processed next day for 24-hour delivery.
- Orders after 12pm Friday: dispatched Monday, delivered Tuesday.
- Automated delivery notifications sent—ensure contact details are correct.
- Large/bulky items (e.g., furniture) delivered curbside if on a pallet—please arrange help for unloading.
- Contact us at returns@primebabygear.com if delivery exceeds the estimated lead time.
Delivery Hours & Weekend Options
- Delivery: Mon-Fri, 8am-6pm (excluding Bank Holidays).
- Saturday morning delivery available at an extra cost—ask when placing your order.
Missed Deliveries & Surcharge
- We will make three delivery attempts. After which items are returned to the depot.
- In such an instance, you will cover surcharge for missed deliveries after all failed attempts.
Wrong Delivery Address
- Ensure your address is correct at checkout.
- Where we have incorrect addresses, we will return goods back to the depot, and you will have to cover surcharge for redelivery.
- We are not responsible for orders signed for by a third party.
Returns Policy
- the 14-day right to cancel applies, you must notify us within 14 days of receiving goods if you want to return the goods.
- Do not send the goods without contacting us for a return address.
- Goods must be unassembled and in original packaging for collection.
- Nursery furniture and items already assembled cannot be returned.
- Return shipping costs are at a cost to you.
- Refunds will be issued within 14 days of return receipt and inspection.
- Refunds may be reduced if goods show unreasonable use or damage.
Damaged in Transit
- Check inside the box as soon as you collect your goods to ensure no damage.
- If damaged, sign as "damaged" and email Returns@primebabygear.com with your order number and photos within 24 hours.
- Replacement is offered free of charge.
- External packaging may show wear from transit; request extra packaging for gifts if necessary.
Faulty Goods
- If faulty, we may offer repair, exchange, or refund as per Consumer Rights Act 2015.
- Proof of purchase is required.
Return of Unwanted Goods
- You have a 14-day no-fault cancellation policy.
- Notify us at info@primebabygear.com within 14 days of receiving goods.
- Refund includes product price and original standard delivery (premium delivery excluded).
- Refund processed within 14 days of goods return.
Collection & Charges
- Collections attempted between 8am-6pm by Yodel.
- Missed collections or unready items incur a rebooking charge of £10 + VAT.